**** PLEASE NOTE: The store will be closed from 12.30pm on Monday 2nd September until Wednesday 11 September 2024 Inclusive. Any orders placed will be fulfilled after that date - subject to stock levels ****

IMPORTANT PLEASE NOTE We are not registered for VAT so the prices you see are the prices you pay!

Please note there is a 4 to 6 week waiting list from placing Tong orders until their dispatch.

Photo shows a 25kg sack not the 5kg bag

This 5kg bag of castable refractory can be used to line furnaces, forges and kilns with a maximum temperature range of 1600C.

It is an easy to product to use.

Mixing instructions - Mix using a minimum amount of water then pour into the mould slowly packing it down every 5 to 10cm to ensure there are no air pockets. It will set in 24hrs but should be left to cure and dry out for 1 week. Heat can then be gradually applied (300 to 400C) to finally drive off remaining moisture prior to bringing it to operating temperature.

Do not rush the process as drying to quickly will result in shrinkage cracks that will lead to a much shorter working life.

​Technical data Sheet
MSDS
Instructions