Ingot Mould (4 bay)

Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release of ingots They are cast from bronze to prevent rust.

The small handle is for tipping out using tongs. Prior to use the ingot mould can be coated with delta cast mould release or mould blacking

For making ingots after melting down scrap or when too much metal has been smelted.

Ingot moulds should be pre-heated to drive off moisture prior to pouring molten metal into them.

Ingot Mould Size External with handle
L 170 x W 110 x H 27mm Ingot 

Capacity Volume 
Total volume 176ml/cc (For comparison would hold 3.4 kg of gold or 1.572 Kg of copper)
Volume per ingot bay 44ml/cc (For comparison would hold 850 grams of gold or 393 grams of copper)