Tools - Foundry
6" Drossing spoon
6" Spoon 32" total length When melting metal slag/dross floats too the surface and is skimmed off with a drossing /skimming…
Aluminium Sand Scoop
Sand Scoop When filling the flask (drag and cope) this is a useful aid when completing work on the bench rather…
Cranked Lift out and Pouring Tongs for A0.5 Crucible (Other size
**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are crankedthe crucible…
Cranked Lift out and Pouring Tongs for A1 Crucible (Other sizes
**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are cranked the…
Cranked Lift out and Pouring Tongs for A2 Crucible (Other sizes
**Check Pivot point for wear and security before each use and replace if worn or damaged** As these are crankedthe crucible…
Cranked Lift out and Pouring Tongs for A3 Crucible (Other sizes
**Check Pivot point for wear and security before each use and replace if worn or damaged** Photo Shows A1 as sample…
Cranked Lift out and Pouring Tongs for A4 Crucible (Other sizes
Safety - Pivot points should be checked regularly and replaced as necessary.
Do not…
Cranked Lift out and Pouring Tongs for A5 Crucible (Other sizes
Safety - Pivot points should be checked regularly and replaced as necessary.
Do not…
Cranked Lift out and Pouring Tongs for A6 Crucible (Other sizes
Safety - Pivot points should be checked regularly and replaced as necessary.
Do not…
Degassing Plunger 60mm
Degassing plungers are use to push degassing tablets or tubes to the bottom of the melt to ensure the chemicals…
Dust Bag (for Grahite powder application)
Description
The graphite dust bag is made from finely woven material and has built in draw string to keep the graphite powder…
Dust Bag (for parting powder application)
Description49 The product is made from finely woven material and has built in draw string…
Flask lift out Tongs 100mm diameter, Other sizes available
Image shows tongs for 100mm diameter flasks. Total length approx 950mm long. **Check Pivot point for wear and security before each…
Furnace Charging Tongs
Furnace Charging Tongs These are cast iron charging tongs essential for safely lowering ingots into the crucible. They can open and…
Galvanised Steel Bucket
Galvanised Steel Bucket
Suitable for hot Ash Slag and Dross
Excellent quenching bucket
Horizontal Body Swedges For Extra Strength
For…
Ingot Mold Pressed Steel
An excellent cheap substitute for the small founder is a small cake tray for making small ingots in all metals…
Ingot Mould (4 bay)
Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…
Ingot Mould Cast (Single bay)
Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…
Ingot Mould Large Flat
Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release…