Unlike some ingot moulds these have been designed with a good taper and smooth inside walls to allow easy release of ingots.
The small handle is for tipping out using tongs. Prior to use the ingot mould can be coated with delta cast mould release or mould blacking
For making ingots after melting down scrap or when too much metal has been smelted.
Ingot moulds should be pre-heated to drive off moisture prior to pouring molten metal into them.
Size External L 165 x W 50 x H 34mm
Ingot Capacity Volume 145ml/cc (For comparison this would hold 2.8kg of gold or 1.29kg of copper approximately)
Ingot Cast Size 154 x 37 x 28mm